ZWave Commander Crack [Latest] 2022 🔺

The ZWave Commander application was developed to be an ZWave Controller Client for the iPhone / iPod Touch and is a native iPhone application that allows you to control your ZWave devices anywhere in the world.
Ever wanted to set your thermostat when you are away from home? How about turn the outdoor floodlights on but didn’t feel like walking back downstairs to turn them on? Now you can! All you need is an ControlThink USB ThinkStick device connected to your PC and ZWave Commander will allow you to control all your ZWave devices.
ZWave Commander consists of two pieces…a server piece which runs on your PC and the client piece which runs on your iPhone or iPod Touch. The server piece included here is called ZWaveCommander.exe and is critical to using ZWave Commander on the iPhone.
The purpose of this program is simple: to allow control of your ZWave devices from your iPhone/iPod Touch with the touch of a finger.







ZWave Commander Crack For Windows (Final 2022)

ZWave Commander will run on your PC or Mac and will allow you to control up to 5 ZWave devices from your iPhone, iPod or iPad.
ZWave Commander supports as many as 5 «ZWave Devices» including groups, scenes and devices. Groups, Scenes and Devices are placed into a «primary» and «secondary» category. The number of devices in a primary category can be controlled in ZWave Commander. In addition, ZWave devices can be organized into «trunk», «accessory» and «fixture» categories (up to 5 devices per category).
Our ZWave devices include:
Touch Panel
The trunk devices have a relay that controls power to the trunk devices and accessories (up to 3 devices)
The accessory devices control the primary and secondary devices and can have as many as two actuators. The accessories can also have a relay that controls power.
The fixture devices can have a light or do other things such as turn on a fan.
A ZWave device can belong to a device group, which contains scenes and devices. A device group can contain many ZWave devices.
All of the ZWave devices are Z-Wave enabled and the ZWave control signals can pass from any ZWave device in a group through the trunk to the next device in the group.
Some of the features of ZWave Commander are:
Multiple primary and secondary devices
Multiple devices per device group
Multiple devices per group
Multiple switch groups
Multiple group switches
ZWave control signals sent from the ZWave devices through the trunk on the «main» device
ZWave to ZWave Device Control
ZWave to ZWave Group Control
ZWave to ZWave Group/Scene Control
ZWave to ZWave Device Control through ZWave Gateway
Firmware Upgrades
ZWave alarm buttons
More to come!!!
Client – iPhone

How to Install ZWave Commander on iPhone
ZWave Commander is available on the App Store for $9.99. To install the program, you will need to have iTunes installed and «Go to the App Store» from your iPhone/iPod Touch

On the iPhone/iPod Touch, you will need to open the App Store application.
Go to the «Widgets» section.
Open the «Games» category.
Search for «ZWave Commander» and «buy»
Make sure you have the «buy» button highlighted on the iPhone/iPod Touch and tap

ZWave Commander For PC

ZWaveCommander is a native app for the iPhone and iPod Touch. It allows the iPhone/iPod Touch to control your ZWave devices. This app requires the ControlThink USB ThinkStick ZWave controller device.
ZWave has three layers of control:
ZWave networks to nodes.
ZWave devices to controllers.
controllers to your phone.
What this app does:
Uses the ControlThink USB ThinkStick ZWave controller device.
Sends ZWave packets to devices.
Sends command packets to nodes.
Provides a basic visual map that shows you all your ZWave devices.
Allows you to control your devices using your fingers on the screen (such as door locks).
Allows you to control your devices using the ZWave controller hardware on your phone such as lighting.
How to configure:
Select ZWave controller device in the list below.
Click «Add Node to Map» to display all devices on a map.
To activate an ON/OFF command, first the light will dim. If that is not enough, then you can select the ON/OFF switch and have it toggle the device on/off until the device is activated.
You can turn a node (specific device) on and off without needing to have your controller attached (for that specific node). Simply tap the node you want to activate/deactivate, and ZWaveCommander will then send the appropriate command to activate/deactivate.
You can select the «Activate All Node» button to activate all devices.
After the system is on, you can double tap the screen to change brightness.
You can scroll left/right using the controls at the top of the screen.
ZWave Commander Download With Full Crack must be installed on a Jailbroken iPhone / iPod Touch to be controlled from the ControlThink USB ZWave Controller.
ZWave firmware:
You must be running firmware 1.10 or higher on your ZWave controller.
ZWave1.0 (Incl. 1.00 for Node Controller and 1.01 for Controller)
ZWave2.0 (Incl. 1.01 for Node Controller and 1.02 for Controller)
ZWave3.1 (Incl. 1.01 for Node Controller and 2.00 for Controller)
ZWave3.2 (Incl. 2.00 for Node Controller and 2.01 for Controller)

ZWave Commander Crack+ With Registration Code X64 (April-2022)

ZWave Commander is a native iPhone application, that lets you control all your ZWave devices from anywhere you have an Internet connection.
This app allows you to:
– Control all your devices from anywhere, using the iPhone.
– Configure your devices via the iPhone.
– Setup new devices in your home
– From your phone, receive alerts and messages from your devices.
– Remotely configure up to 50 different ZWave devices from your iPhone.
– Keep track of your devices on a consolidated dashboard on your iPhone.
– Prevent (kick off) your devices.
– Set up Zwave scenes.
– Control multiple network ZWave devices, your ZWave network, and more
– iPhone/iPod touch running iOS 3.0 – 2.1.3
– USB ZWave Controller (ControlThink USB ThinkStick)
– ControlThink driver (found on ControlThink’s web site)
– ZWave router
– A Mac running Mac OS X 10.5 or higher
– A PC running Windows XP or newer

App Reviews:

Welcome to the «Hot Buttons Command Center» as the following title says, it is a program that can help you to create your own custom pressed buttons for your remote, and make it…

Welcome to the «Hot Buttons Command Center» as the following title says, it is a program that can help you to create your own custom pressed buttons for your remote, and make it act as an universal remote (varies from IR remote to infrared remote…) with the press of one button.
(Plug-in: up to 6 pressure sensors, we will be adding more later)
However it can do everything, my remote has all the commands, like volume up/down, pause/play, fast forward/rewind, subtitles, screen turning on/off, channel changing, mute on/off, power on/off, program changing, presentation mode, power save mode, power on/off, and control the volume with the cursor.
(Plug-in: Audio file preview with play and pause, with some

What’s New In?

1. First, you need to configure the device by defining the network name for each of the devices that you wish to control. See the section on defining networks and controllers.
2. Then, you open ZWaveCommander.exe. The screen will appear and immediately show a list of supported controllers. If this list contains your controller, you can select it and a list will appear to show the supported devices in your network.
3. If you wish, you can select one of the devices and change its settings. See the section on changing device settings.
4. When you are done, you just need to close the program by tapping the ‘X’.
For detailed installation instructions, please refer to the Instruction Manual

Version 1.2.2
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
+ – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
# Changed the name of the iOS App to ZWave Commander
# Added support for «ZWave Non Smart» devices
# Fixed several bugs with the z_dev.dll crashes with some devices
# Updated 1.2.0

Version 1.2.1
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
+ – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
# ZWave Explorer (required for the ZWave Non Smart Devices)

Version 1.1.0
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Version 1.1.0
+ – – – – – – – – –

System Requirements For ZWave Commander:

Windows 98/Me/2000/XP/Vista.
Winamp 2.95+, Winamp Pro.
Avalon (Installer available at
Microsoft Internet Explorer 6.0 (downloads are available at
See the «Installation» section for more details on installing and configuring Avalon.
Avalon also requires Java Runtime Environment 1

Estaremos encantados de escuchar lo que piensas

Deje una respuesta

Comparar artículos
  • Total (0)
Shopping cart